Ufo Capture V2 Keygen For Mac

UFOCapture Night Sky Observation Guide UFOCapture Night Sky Observation Guide V2.0 2.3 UFOCapture setup Step 5 Installation of UFOCapture Step 5-1 Create directory Create 4 directories below. UFO Program directory. A directory which contains program files of UFOseries. 15MB will be needed to contain UFO2,UFOA, and UFOOrbit. C: program files UFO.

1. Ufo Capture V2 Keygen For Mac

Capture target directory. A directory which contains captured movies, still images, log files. You should always keep more than 40GB of free area (assuming maximum number of clips in one night is 1000 ). Recommended to have 100GB or larger for continuous use. In general, 50GB will be sufficient for one month meteor observation except trash. This directory must be in fast inner volume.

You should optimize the volume once in a month. You can use volume root directory as target directory such as D:. ex. D: UFO. Analyze output directory. A directory which contains output of UFOAnalyzer. 500MB will be sufficient for a few years.

You are recommended to make year and month sub directories. D: UFO DB 2005 Dec. CSV data base directory. A directory which contains results from many sites. 10MB will be sufficient for a few years.

You are recommended to make year and month sub directories. ex: D: UFO CSV 2005 Dec Step 5-2 UFOCaptureV2 installation.

There is no special installation procedure, just expand and place it. Download latest UFO2 package such as 'UFO205.zip' from.

Expand the package by some decompression tool to appropriate directory. Windows Xp naively have un-zip function.

Confirm that you got UFO2 directory and UFO2.exe in it. When UFO2.exe was not expanded, you should de-block security option of windows Xp. Open property page of the package and push de-block button before expanding. Move UFO2 directory as a sub directory of UFO program directory. In case of changing the directory of UFO2 directory. Run UFO2.exe. Open Operation sheet, and push re-install ax button.

This operation notice the directory to your system, and is needed once when execution directory has been changed. In case of version up, you are recommended to overwrite UFO2 directory, then you can maintain all of your settings. All latest settings are kept as a file 'Settings.ufi' which is not included in the package.

Ufo Capture V2 Keygen For Mac

Registration. When you want to register your licence key, do steps below. Run UFO2.exe. Open Operation sheet. Push Registration button.

Fill V2 Serial Code and V2 Licence key. When using upgrade key, check Upgrade Registration ON, and fill V1 User Name and V1 License Key also.

Push Register button and you will get 'registration succeeded' message. DB directory assign. Run UFO2.exe. Open DB sheet. Button of DB dir line. Select your capture target directory as DB dir. Step 6 Confirmation of the capture driver.

Stop other applications, get ready your video equipments, then Run UFO2.exe. Confirm or select your capture hardware driver at the Video drop down list box in Input sheet. The name of the driver may differ a little from the official name of the hardware. If you use IEEE1394(DV) as capture device, select 'Microsoft DV Camera and VCR'.

The driver names appear only when they are ready and not in use. Step 7 Previewing test. Set resolution of video(Xi, Yi) and frame rate(Fps) which are supported by your driver. Example of general settings. Input Signal Videoformat Safety Setting High load Setting analog NTSC Xi=320,Yi=240,Fps=29.97 Xi=640,Yi=480,Fps=29.97 PAL Xi=352,Yi=288,Fps=25.0 Xi=704,Yi=528,Fps=25.0 IEEE1394(DV) NTSC Xi=360,Yi=240,Fps=29.97 Xi=720,Yi=480,Fps=29.97 PAL Xi=352,Yi=288,Fps=25.0 Xi=720,Yi=576,Fps=25.0. Push Preview button in Live sheet, and confirm input video signal is shown in live windowB. When your capture hardware has multiple inputs, select prefer input pin in the combo box below during previewing.

When you get error message, please refer Step 8 Manual recording test. Push Rec button in Live sheet, then recording will start. Push RecOff button (same position as Rec button), and recording will stop after a few seconds ( time shifted ).

Click Replay tab to go to Replay sheet, DB sheet will be shown in right area. Click clip name(Mxxxxxxxxxxxx.) shown in the list area, snap shot still image will appear in replay window.

Click ' ' button in Replay sheet, recorded clip will be replayed. Step 9 Detection test. Go back to Live sheet and push Detect button. Let input video have some change(ex. Move hands before camera), then recording will start automatically and stop when the change is seized.

Replay and confirm the results. If you got appropriate video clips and still images, all test was passed. Step 10 Basic setting. Go to Operation sheet.

Push Read Settings button and select appropriate default setting. NTSC analog input - NF640x480N.ufi. NTSC IEEE1394 - NF720x480N.ufi. PAL - PF640x480N.ufi or PF720x576.ufi. Confirm device name, DB dir and Xi,Yi,Fps settings. Do Detection test again, and confirm you can get appropriate results of high resolution. Please check CPU load by Task Manager of your system during the test, and confirm the load is below 90%.

Step 11 Profile setting. Profile information is used for sun raise/set time calculation, super impose and logging. You should set all information properly. ex:. Here, you have finished necessary settings.

Step 12,13,14 are optional. You can use default parameters. Step 12 Super impose setting. Set appropriate super impose format. ex:. Size M. Size S.

You can use '%t' instead of '%T' to get 'dd/mon/yyyy' date format. When you want to use UTC instead of local time, check UTC check box. Step 13 Dark object mask setting. Dark object mask is not to detect dark movement of dark objects.

This function is not perfect, but reduces most of detection of birds or insects in night sky. Check DarkObjMask check box, set 0 as DOlevel. Normally, there is no need to change it.

You can set 1 or 2 as DOlevel, this will reduce more, but do not set DOlevel above MinL-N, or you may lose some bright objects. Step 14 Slow object mask setting. Slow object mask function tracks the objects that move slowly and mask the area around it in real time. Once some object is detected, this function observe it for 3 seconds, calculate its moving speed, and mask it when it is continuous slow moving object. Set this option ON to avoid the capture of airplanes, OFF to capture all events including airplanes or satellites.

Slow Object Mask area is shown in white rectangle in view area. While gray rectangle is the mark of observing stage.

Pixel/s: Highest speed of which should be masked. Normally 15 is recommended for wide lens. 40 is recommended for narrow lens. SOsize: Size of mask pattern (pixel length of the edge of mask rectangle). Normally 15 is recommended for wide lens to avoid the effect of the flash lights of air plane.

This function is very useful to reduce the capture of airplanes. There is no need to change this setting unless you change your lens.